INSTALLATION INSTRUCTION
9
ENGLISH
Install Setting
How to enter installer setting mode
1 If you want to set installer setting mode,
Press the Temperature up button and the
Room Temp button same time for five sec-
onds.
2 When you enter the setting mode Initially.
Function code is displayed on the LCD
screen.
TEMP
FAN
SPEED
ROOM
TEMP
- Some categories of the menu may not
be displayed according to the function
of the product, or the menu name may
be different.
CAUTION
• Installer setting mode is to set the de-
tail function of the remote controller.
If the installer setting mode is not set
correctly, it can cause problems to the
product, user injury or property dam-
age. This must be set by an certificated
installer, and any installation or change
that is carried out by a non-certificated
person should be responsible for the re-
sults. In this case, free service cannot
be provided.
!
Function Code
Value
To Next Page
Loading...
Need help?
General
