LG PQRCHCA0QW User Manual

Fahrenheit Switching
14
INSTALLATION INSTRUCTION
ENGLISH
It’s a function for setting in group control, or 2-
remote controller control.
1 Press button and button Simulta-
neouslly for more than 3 seconds.
2 Setup function code ’07’ pressing by
button.
3 Select Master/Slave by pressing tempera-
ture button. (00: Slave, 01: Master)
4 Press button to save.
5 Press button and button Simulta-
neouslly for more than 3 seconds After the
setting has been completed.
-
Refer to eh ‘Group control’ part for details.
• When controlling in groups, basic operation
settings, airflow strength
weak/medium/strong, lock setting of the re-
mote controller, time settings, and other
functions may be restricted.
This function is used for switching the display
between Celsius and Fahrenheit.
(Optimized only for U.S.A)
1 Press button and button Simulta-
neouslly for more than 3 seconds.
2 Setup function code ’12’ pressing by
button.
3 Select Temperature unit mode by tempera-
ture button.
(00: Celsius , 02: Fahrenheit)
4 Press button to save.
5 Press button and button Simulta-
neouslly for more than 3 seconds After the
setting has been completed.
❈ Whenever press button in Fahren-
heit mode, the temperature will
increase/drop 2 degrees.
Function Code
Fahrenheit setting
value
Function Code
Master/Slave Value
Remote
Controller
Function
Master
Indoor unit operates based on
master remote controller at
group control. (master is set
when delivering from the ware-
house.)
Slave
Setup all remote controllers ex-
cept one master remote con-
trooler to slave at group control.
Remote Controller Master/Slave
Setting

LG PQRCHCA0QW Specifications

General

Brand	LG
Model	PQRCHCA0QW
Category	Controller
Language	English