LG PQRCVCL0QW User Manual

16 Wired Remote Controller
Installation instruction
• Whenever press temp up(s), down(t) button in Fahrenheit mode, the temperature will
increase/drop 2 degrees.
Installer Setting-Celsius / Fahrenheit Switching
TEMP
FAN
SPEED
OPER
MODE
When pressing the button and
button simultaneously for more than 3
seconds, the system will be entered into the
installer setting mode.
- After entering into the installer setting
mode, select the ceiling height setting code
value by pressing the oper-mode button.
* Celsius/Fahrenheit setting code value : 07
1
Select the desired setting value with the
temperature up(▲), down(▼) button.
2
When pressing button, currently
established celsius/Fahrenheit setting
value will be set up.
3
When pressing the button and
button simultaneously for more than 3
seconds after the setting has been
completed, the setting mode will be released.
- If there isn’t any button input for more than
25 seconds, the installer setting mode will
also be released.
4
OPER
MODE
Code value
*Setting value
00:Celsius
01:Fahrenheit
OPER
MODE
Value
This function is used for switching the display between Celsius and Fahrenheit.
(Optimized only for U.S.A)

LG PQRCVCL0QW Specifications

General

Brand	LG
Model	PQRCVCL0QW
Category	Remote Control
Language	English