TEMP
FAN
SPEED
OPER
MODE
After operating the product by pressing
the button, set up the dry
(Dehumidification) by pressing the
button.
1
When the dry operation is selected, “dh” will
be shown on the display window as shown
on the left side.
- The temperature setting can not be
adjusted during operation this mode.
2
Press the button to select airflow rate
[SLo→Lo→Med→Hi→Po].
- The initial wind powerfulness of humidity
removal drive is ‘weak’.
3
OPER
MODE
FAN
SPEED
It removes humidity while air-cooling weakly.
• In rainy season or high humidity climate, it is possible to operate simultaneously dehumidifier and
cooling mode to remove humidity effectively.
• The menu item of wind powerfulness might not be partially selected according to the product.
To Next Page
Loading...
Need help?
General
