11. ENGINEERING MODE
- 149 -
11. ENGINEERING MODE
Engineering mode is designed to allow a service man/engineer to view and test the basic functions provided
by a handset. The key sequence for switching the engineering mode on is “2945#*#” Select. Pressing END
will switch back to non-engineering mode operation. Use Up and Down key to select a menu and press
‘select’ key to progress the test. Pressing ‘back key will switch back to the original test menu.
[1] BB TEST
[1-1] BACKLIGHT
[1-1-1] BACKLIGHT ON HIGH
[1-1-2] BACKLIGHT ON LOW
[1-1-3] BACKLIGHT OFF
[1-1-4] BACKLIGHT ALWAYS ON
[1-1-5] BACKLIGHT AUTOMATIC
[1-2] LCD
[1-2-1] LCD COLOR
[1-3] CAMERA
[1-3-1] CAMERA MAIN PREVIEW
[1-3-2] CAMERA ISP DOWNLOAD
[1-3-3] FLASH ON
[1-3-4] FLASH OFF
[1-4] BATTERY INFO
[1-4-1] BATTINFO
[1-5] VIBRATOR
[1-5-1] VIBRATOR OFF
[1-5-2] VIBRATOR ON
[1-6] BLUETOOTH
[1-6-1] BT ON/OFF TEST
[1-6-2] ENTER TEST MODE
[1-6-2-1] RF TEST
[1-6-2-2] AUDIO TEST
[1-6-3] BPP XHTML TEST
[1-6-4] BT PORT SETTING
[1-7] AUDIO
[1-7-1] CLOSE
[1-7-2] EmMELODY ON
[1-7-3] EmMELODY OFF
[1-7-4] EmMP3 ON
[1-7-5] EmMP3 OFF
[1-7-6] EmMELODY Auto
[1-7-6] EmMP3 Auto
[1-8] FM RADIO Open
[2] ENG MODE
[2-1-1] PS LAYER INFO
[2-1-2] MOBILITY
[3] MF TEST
[3-1] BACKLIGHT
[3-1-1] BACKLIGHT ON HIGH
[3-1-2] BACKLIGHT ON LOW
[3-1-3] BACKLIGHT OFF
[3-2] AUDIO
[3-2-1] CLOSE
[3-2-2] EmMELODY ON
[3-2-3] EmMELODY OFF
[3-2-4] EmMP3 ON
[3-2-5] EmMP3 OFF
[3-2-6] EmMELODY Auto
[3-2-7] EmMP3 Auto
[3-3] VIBRATOR
[3-3-1] VIBRATOR OFF
[3-3-2] VIBRATOR ON
[3-4] LCD
[3-4-1] LCD COLOR
[3-5] AUDIO GAIN
[3-5-1] TOUCH PAD TEST
[3-5-2] TOUCH PAD DOWN TEST
[3-6] CAMERA
[3-6-1] CAMERA MAIN PREVIEW
[3-6-2] CAMERA ISP DOWNLOAD
[3-6-3] FLASH ON
[3-6-4] FLASH OFF
[3-7] FM RADIO
[3-7-1] FM RADIO TURN ON
[3-7-2] FM RADIO TURN OFF
[3-7-3] FM RADIO SEEK UP
[3-7-4] FM RADIO SEEK DOWN
[3-8] CONNECTION
[3-8-1] BLUETOOTH
[3-8-1-1] COMMUNICATION
MODE
[4] MODEL VERSION
[4-1] VERSION
[5] FACTORY RESET
[5-1] FACTORY RESET
To Next Page
Loading...
