14 Auxiliary Heater Relay Kit
Installer Setting
Function Function Code Setting Value
Remote Controller LCD
3 : Set to Auxiliary heater
Auxiliary heater
2
4 : Cancel Auxiliary heater
5 : Check Auxiliary heater Installation
Installer Setting Code Table
23
24
25
The indoor unit displays during the heating mode, the Auxiliary heater is automatically turned on, but it is not
displayed on the wireless remote controller.
Wireless Remote Controller(Accessory)
It can only be set during heating operation.
1
Press the SET/CLEAR button to reserve or cancel the Electric
heater function.
2
Press the FUNCTION SETTING button
3 times.
Electric heater symbol will blink.
Model : PQWRHQ0FDB
To Next Page
