LG ProCentric 55UV560H

To Next Page

To Previous Page

206-4326

EZ-Manager Wizard (Cont.)

Note: The Zoning feature is only applicable for TVs that will be congured using a “.tlx” le (local or

remote conguration).

ZONE, LABEL, AND ROOM NUMBER

SAVE

If creating Zones for Installer Menu settings and/or Channel Mapping,

select the appropriate TV Zone # (0-8) based on the Zone in which

this TV is installed. (See Commercial Mode Setup Guide for more

information.)

Select a Label and/or input the Room Number, as required.

When done, select SAVE to continue.

BACK

TV Zone

Label

-----

Room Number

SAVE

BACK

1. Complete the appropriate eld(s) as described below. Use the Up/Down arrow keys on the

Installer Remote to navigate between each of the elds.

• TV Zone: Enables you to set a TV Zone # so that the TV can be congured with Installer

Menu and/or Setup Menu settings intended only for the assigned Zone. The Installer Menu

and/or Setup Menu settings may be provided in a Clone/Conguration (.tlx) le. If the TV is

being congured for FTG Mode, the TV Zone # setting also allows the TV to omit channels

that have been restricted in the FTG Channel Map.

To change the TV Zone from its default value (0), navigate to the TV Zone eld, and use the

Left/Right arrow keys to specify the desired TV Zone # (1–8).

• Label: Allows you to select a North, South, East, or West text label for this TV. In the Label

eld, use the Left/Right arrow keys to select the applicable label.

• Room Number: Allows you to specify the number of the room—up to 16 characters—in which

the TV is located. To enter a room number, navigate to the Room Number eld and press OK.

You can then use the number keys on the Installer Remote to direct enter a room number, or

you can use the arrow keys to select the appropriate alphanumeric character(s) from the pop-

up virtual keyboard at the bottom of the screen. When you are done, select Enter from the

virtual keyboard, and then press OK on the Installer Remote.

2. When you are ready to continue, use the arrow keys to select SAVE, and then press OK on the

Installer Remote to return to the TV Conguration Options screen. Then, proceed as required;

i.e., select NEXT to congure Pro:Centric settings or select USB CONFIGURATION to use a

USB memory device to complete the conguration.

LG ProCentric 55UV560H - Page 19