LG ProCentric 55UV560H - USB Configuration Options

24
206-4326
(Continued from previous page)
If you opt to initiate a real-time download in the last step, the EZ-Manager Wizard will proceed with
the Pro:Centric application and/or E-Z Installation data downloads (see Processing the Pro:Centric
Conguration screen example on page 21). When the Pro:Centric conguration is complete, an
EZ-Manager Conguration Complete screen (see example on page 21) is displayed, and after 10
seconds, the wizard exits, and the TV turns OFF.
Note: With the EZ-Manager Conguration Complete screen on display, you can also manually turn
off or reboot the TV. If desired, select TURN OFF or REBOOT, respectively, and then press OK on
the Installer Remote.
USB Conguration
TV Manager / USB download options enable you to download conguration or software les
individually from a USB memory device to the TV. You can also use the Ez Download utility
available from the menu to select muliple types of les to be downloaded at one time using one
process.
Each of the USB download functions requires that you have the appropriate le(s) loaded on a USB
memory device. If you wish to perform a software update or download splash screen/background
image les, the software update/image le(s) must be stored in a folder named “LG_DTV” in the
root directory of the USB memory device. Clone/Conguration (.tlx) les should simply be stored
in the root directory of the USB device.
The procedure below assumes that the desired le(s) is/are already loaded onto the USB device.
For further information on TV Manager / USB download options and le requirements, and/or for
information on creating Clone/Conguration (.tlx) les, refer to the appropriate section(s) in this
document.
Before You Begin
• If you intend to use the Zoning feature on this TV, make sure to assign the appropriate TV
Zone # in the EZ-Manager’s Zone, Label, and Room Number screen BEFORE continuing with
USB Conguration. See “TV Conguration Options” on page 18 for further information.
• Ensure the USB device to be used has been formatted with FAT format.
• When creating les to be downloaded, avoid using special characters (?, &, @, etc.) in lenames.
• Refer to “Ez Download Utility” on pages 26 to 29 for further information on the Ez Download utility.
• Refer to “Custom Master TV Setup” on pages 40 to 42 for information on creating a Clone (.tlx)
file, and/or refer to “Creating an FTG Conguration File” on pages 49 to 51 for information on
creating an FTG Conguration (.tlx) le for FTG Mode conguration.
• See Reference section, “Downloading a Splash Screen Image using a USB Memory Device,” for
splash screen image guidelines.
• See Reference section, “Downloading Background Images using a USB Memory Device,” for
background image guidelines.
• See Reference section, “Updating TV/PTC Software using a USB Memory Device,” for further
information on software updates.
EZ-Manager Wizard (Cont.)