LG ProCentric 55UV560H - Page 21

21
206-4326
(Continued from previous page)
If the process is successful, no further user interaction is required, though, in some instances,
where the option (for example “NEXT”) is available, you may manually move forward to subsequent
steps within the wizard to speed up the process.
PROCESSING THE PRO:CENTRIC CONFIGUR...
Downloading the Pro:Centric application files takes a few minutes.
Please wait...
Retrieving files from data channel 70
Application files In progress...
Maintenance Files Synchronizing...
Warning - Do not remove AC power or the signal cables during these steps.
2%
Note: If, after completing the search, the TV is unable to nd the Pro:Centric data channel (while
the Searching for Pro:Centric Server screen is on display), the wizard will stop and show a
Diagnostics screen that enables you to manually return to the previous screen (to reinitiate the
conguration) or exit the wizard.
When the Pro:Centric Conguration is complete, an EZ-Manager Conguration Complete screen is
displayed (see example below), and after 10 seconds, the wizard exits, and the TV turns OFF.
Installed Components
Pro:Centric Application GEM application downloaded
Maintenance Files LY970H_Config.tlx
EZ-MANAGER CONFIGURATION COMPLETE
TV will turn o in 10 second(s)
Installed Components
Pro:Centric Application GEM application downloaded
Maintenance Files UV560H_Config.tlx
REBOOT
TURN OFF
Note: With the EZ-Manager Conguration Complete screen on display, you can also manually turn
off or reboot the TV. If desired, select TURN OFF or REBOOT, respectively, and then press OK
on the Installer Remote.
EZ-Manager Wizard (Cont.)