LG ProCentric 55UV560H - TV Configuration Options; Zone and Room Number Assignments

18
206-4326
EZ-Manager Wizard (Cont.)
TV Conguration Options
From the TV Conguration Options screen, you can choose how to proceed with the conguration of
this TV (assuming you do not opt to exit the wizard, which you may also do at any time).
Note: If you intend to use the Zoning feature on the TV for location-specic
conguration purposes, select the “Zone & Room Number” option from this screen
and assign the appropriate TV Zone # in the TV BEFORE you continue with additional
conguration.
TV CONFIGURATION OPTIONS
.
To configure the TV for Pro:Centric operation, select NEXT.
.
To set the optional Zoning feature, select ZONE & ROOM NUMBER.
.
To configure the TV using a USB memory device, select USB CONFIGURATION.
This wizard will continue automatically in 60 seconds.
ZONE & ROOM NUMBER
01
USB CONFIGURATION
NEXT
X
Note: If there is no user action in this screen within one minute, the wizard will automatically
continue to the next conguration step.
Use the Up/Down arrow keys on the Installer Remote to navigate between options on this screen.
• To continue with Pro:Centric conguration, select NEXT (default) and press OK on the Installer
Remote. Refer to “Congure Pro:Centric Settings” on pages 20 to 24 for additional information.
• To set the Zoning feature on the TV, select ZONE & ROOM NUMBER. See “Zone and Room
Number Assignments” below for further information.
• To access the TV Manager / USB download options, select USB CONFIGURATION. See “USB
Conguration” on pages 24 to 25 for further information.
Note: If you choose to exit the EZ-Manager Wizard from this point on, you will have the option to
save any settings made by selecting SAVE & EXIT in the exit conrmation pop-up window. Or, you
can exit the wizard without saving any settings by simply selecting EXIT in the conrmation pop-up
window.
Zone and Room Number Assignments
You may complete one or more of the elds in the Zone, Label, and Room Number screen or
leave them at their default settings (TV Zone) or blank (Label and Room Number), as desired;
however, if you intend to use the Zoning feature on this TV, you MUST specify the appropriate
value in the TV Zone eld as described below. See also Reference section, “Using the TV Zoning
Feature,” for further information.