47
206-4326
(Continued from previous page)
4. Insert the USB memory device with the Clone/Conguration (.tlx) le into the USB port on the
Target TV.
5. Press MENU SETTINGS on the Installer Remote to display the TV setup menus (TV is in
Pass-through Mode) or the Function Menu (TV is already in FTG Mode).
6. (TV in Pass-through Mode only) From the Quick Settings Menu displayed at the right of the
screen, select the All Settings menu icon and press OK to access the advanced TV setup
menus.
7. Use the arrow navigation keys to select/highlight either the General menu icon from the TV
setup menus or the Safety menu icon from the Function Menu. Then, press the number “7” key
a total of seven times to access the TV Manager.
Note: Ez Download is always selected by default when you initially access the TV Manager.
Also note that Diagnostics is for service use only.
Select the file(s) to download, and then select UPDATE below.
Logo Image Download
Splash Image ProC.jpg
Insert Background Image(s)
None
Update TV Software
UV560H_CPU_SW.epk
Update PTC Software
UV560H_PTC_SW.txt
Import Clone File
UV560H_IM.tlx
<
>
USB DEVICE
TV MANAGER
Ez Download
USB 1:
Device Name
Ez Download
Logo Image Download
Insert Background Image(s)
Update TV Software
Update PTC Software
Import Clone File
Diagnostics
UPDATE
Image1
.jpg Image2.jpg Image3.jpg
Image4
.jpg Image5.jpg Image6.jpg
Image7
.jpg Image8.jpg
Image9.jpg
X
8. Use the Up/Down arrow keys to select Import Clone File, and then press OK.
A list of the “.tlx” les stored in the root folder of the USB memory device will be displayed on
the screen (see example on following page).
9. Use the arrow keys on the Installer Remote to select/highlight the “.tlx” le to import, and then
press OK.
Note: Filenames of exported Clone les are comprised of the TV model and a ve-digit number,
for example,
xxUV560H-UA00001.TLX
.
10. If the Clone/Conguration (.tlx) le includes an FTG Channel Map, you can choose the format
for the channel tuning/banner display. Use the arrow keys to select the desired Channel
Tuning / Channel Banner Display option—either Logical or Physical—at the right side of the
screen. A checkmark will appear at the left of the selected option. Logical tuning is selected by
default.
Cloning Procedures (Cont.)
(Continued on next page)
To Next Page
Loading...
