LG ProCentric 55UV560H - Page 59

59
206-4326
IP Environment Setup (Cont.)
(Continued from previous page)
• Select/highlight the Update Event eld and press OK on the Installer Remote. Then, use
the Up/Down arrow keys to select either Enable or Disable from the drop-down list of options.
When Update Event is set to “Enable,” an Update Time eld is displayed on the screen.
• If Update Event is enabled, set the Update Time as required. Use the arrow keys on the
Installer Remote to select/highlight the Update Time eld, and then press OK. Hour, Minute,
and Meridiem elds will be displayed. Select each eld in turn and specify the appropriate
Wake For Update time, as desired. Note that the Update Time set in this menu is based on a
12-hour clock. Ensure the meridiem (AM/PM) specication is set accordingly.
6. Once all elds are completed as required, use the arrow keys on the Installer Remote to return
to the IP Environment Menu, as necessary, or press to exit the IP Environment Menu.