ENGLISH
Installing and Using the Product
Please read this manual carefully before operating your set and retain it for future reference.
To view the instructions of advanced features, visit http://www.lg.com or scan QR code and then download
Owner’s Manual. Some of the content in this manual may differ from your product.
A Sound bar
B Remote Control Receiver /
Status LED (Refer to below table)
C Wireless Subwoofer - Install it close to the sound bar.
D External Device - (Blu-ray player, game console, etc.)
Power on Standby
OPTICAL /
HDMI ARC
Bluetooth
ready
Bluetooth HDMI IN USB
Red blinking Red White Blue blinking Blue White White
a Connect the sound bar to your TV via an optical cable or an HDMI cable.
b If you are using an external device (ex. Blu-ray player, game console, etc.), connect it to the sound bar via an HDMI cable.
c Connect to power in the following order: wireless subwoofer [ sound bar. Then, turn on the sound bar. When the connection is
automatically established with the sound bar, the LED on the wireless subwoofer will light up in green.
d Using the product with your TV
A Press the Function
button repeatedly until the rst LED light up in white among the three LEDs.
B On your TV’s settings, set the output speaker to [HDMI ARC], [Optical], or [External Speaker].
e Connecting the unit to your smartphone via Bluetooth
A Tap the Settings
button on your smartphone and select Bluetooth.
Turn on the Bluetooth function. ( Off > On)
B Press the Bluetooth pair
button. After a moment, the second LED blink in blue among the three LEDs.
C Find and tap the product on your smartphone. The product appears as “LG QP5W / QP5 (XX)”.
f Connecting to the LG Sound Bar app
A Find and install the LG Sound Bar app on Google Play or App Store from your smartphone.
B You can get more information regarding its use by selecting [Help] in [Setting].
If you see a red LED on the bottom of the wireless subwoofer, it means that the sound bar is not connected to the speaker. If this is the
case, connect them in the following order.
A Press the Power
button on the sound bar to turn it off.
B
Press the PAIRING button on the bottom of the wireless subwoofer. Check if each LED blinks green.
- If you still see a red LED on the bottom of the wireless subwoofer, press and hold the button on the bottom of the subwoofer again.
C Press the Power
button on the sound bar to turn it on.
D When the connection is established, you will see a green LED light on the bottom of the wireless subwoofer light up in green.
Keep the sound bar, the subwoofer away from the device (ex. wireless router, microwave oven, etc.) over 1 m (3.3 ft) to prevent wireless
interference.
y Design and specications are subject to change without notice.
y Google Play is a trademark of Google LLC.
QP5W.DUSALLK_SIMPLE_MFL71810903.indd 3 2021-05-17 1:40:19
To Next Page
Loading...
Need help?
General
