To Next Page
J
John YatesSep 9, 2025
What to do if camcorder image is not shown on LG RC278?
- LlindabrownSep 9, 2025
If the camcorder image is not shown on your LG DVD Recorder, ensure the camcorder is turned on and operating properly.
What to do if camcorder image is not shown on LG RC278?
If the camcorder image is not shown on your LG DVD Recorder, ensure the camcorder is turned on and operating properly.
What to do if camcorder image via A/V input or DV IN to LG RC278 DVD Recorder is not shown on TV screen?
If the camcorder image via A/V input or DV IN to your LG DVD Recorder is not shown on the TV screen, the Recorder INPUT SELECT may be incorrect. Use AV/INPUT to select the correct input channel (AV1, AV2, AV3, DV, etc.).
What causes a distorted picture from an external input on my LG DVD Recorder?
If the picture from the external input is distorted on your LG DVD Recorder, it may be because the video signal from the external component is copy-protected. In this case, you cannot connect via this recorder; connect the component directly to your TV.
What does moisture condensation mean for LG DVD Recorder?
To prevent moisture condensation in your LG DVD Recorder, keep the recorder plugged into an AC power outlet with POWER On. If condensation has occurred, wait a few hours for the recorder to dry before using it.
Why are some channels skipped when using v / V on my LG RC278 DVD Recorder?
If some channels are skipped over when using v / V on your LG DVD Recorder, it's likely because those channels are not stored in the recorder. Restore channels.
General| Brand | LG |
|---|---|
| Model | RC278 |
| Category | DVD Recorder |
| Language | English |
