19
Using Microphone
1. Connect your microphone to the MIC jack.
2. Play the music you want.
3. Sing along with the accompaniment.
Adjust the microphone volume by rotating
MIC VOL.
s
clockwise or counterclockwise on the
unit.
y
When not using the microphone, set the
MIC volume to minimum or turn off the MIC
and remove the microphone from the MIC
jack.
y
If the microphone is set too near the speaker,
a howling sound may be produced. In this case,
move the microphone away from the speaker
or decrease the sound level by rotating
MIC VOL.
s
y
If sound through the microphone is extremely
loud, it may be distorted. In this case, rotate
MIC VOL.
s
to minimum.
y
You can give an echo effect to the sound
from the microphones by pressing ECHO /
DEMO
,
Note
ECHO
When you connect
your microphone to the MIC
jack, you can give an echo effect to the sound from
the microphones by pressing ECHO / DEMO.
ECHO 1 ECHO 2 ECHO OFF
y
If a microphone is not connected, “INSERT
MIC” appears in the display window.
y
If you press VOCAL EFFECTS button on
ECHO mode, after backing up current ECHO,
turn off ECHO mode and operate VOCAL
EFFECTS mode.
Press ECHO / DEMO again, after backing
up current VOCAL EFFECTS, operate ECHO
mode.
,
Note
To Next Page
Loading...
