15
IMPORTANT SAFETY INSTRUCTIONS
ENGLISH
•The dryer should always be
plugged into its own individual
electrical outlet which has a
voltage rating that matches
the rating plate. This provides
the best performance and also
prevents overloading house
wiring circuits which could cause
a fire hazard from overheated
wires.
•Never unplug your dryer by
pulling on the power cord.
Always grip plug firmly and
pull straight out from the
outlet. The power cord can be
damaged, resulting in a risk of fire
and electric shock.
•Repair or replace immediately
all power cords that have
become frayed or otherwise
damaged. Do not use a cord
that shows cracks or abrasion
damage along its length or at
either end. The power cord can
melt, creating electric shock and/
or fire hazard.
•When installing or moving the
dryer, be careful not to pinch,
crush, or damage the power
cord. This will prevent injury and
prevent damage to the dryer
from fire and electric shock.
•To reduce the risk of injury
to persons, adhere to all
industry recommended safety
procedures including the use of
long sleeved gloves and safety
glasses. Failure to follow all of the
safety warnings in this manual
could result in property damage,
injury to persons or death.
•The final part of the tumble dryer
cycle occurs without heat (cool
down cycle) to ensure that the
items are left at a temperature
that ensures that the items will
not be damaged.
SAVE THESE INSTRUCTIONS
To Next Page
Loading...
Need help?
General
