41
PROGRAMMING MODE
ENGLISH
13. Beep Volume Setup
Beep Volume Setup can be used to set the sound level of the machine.
Beep Volume Setup
Display
Enter SVC Mode
Press 1st button
Press 2nd button
Press Start button
Press 2nd button or 3rd button Until display shows
Press Start button
Select the setting you want
Button functions :
Start button = Select
1st button = Go back a step
2nd button = Move up or Increase value
3rd button = Move down or Decrease value
Press Start to set the sound level The next menu setting will be displayed.
To Next Page
Loading...
Need help?
General
