LG RN1840 Series User Manual

64
ERROR MODE / POWER FAIL RECOVERY / DEFAULT DRYER SETTINGS
ERROR MODE
Meaning of Error Codes that LED displays during occurrence or
problem.
Dryer error code
PROBLEM POSSIBLE CAUSE SOLUTION
It is displayed when Outlet thermistor is
opened or shorted
shorted Thermistor should be replaced.
When a fire inside the product is detected, or
the temperature of the Outlet Thermistor is
abnormal.
Check the duct blocked and fire occurred
It is displayed when Inlet thermistor is opened
or shorted
shorted Thermistor should be replaced.
1. Motor harness is disconnected
2. Motor coil or hall sensor is damaged
1. Check the Motor harness.
2. Check the Motor.
It is displayed when gas supply is wrong
1. Check the gas supply
2. Check the Lint filter and duct blocked
POWER FAIL RECOVERY
In case of power failure the machine stops running but the time display remains on, showing the time just before
power failure.
Press the Start button after the power is restored, then the machine will restart.
DEFAULT DRYER SETTINGS
Default Settings Default
Cycle Time (Minutes) 40 Minutes
Cool Down Time Cycle 2 Minutes
High Temperature 154,4° F (68° C)
Medium Temperature 140° F (60° C)
Low Temperature
ELECTRIC TYPE 125,6° F (52° C)
GAS TYPE 116,6° F (47° C)
Top O Time (Minutes per coin) 5 Minutes
Coin #1 Value 1,00
Minutes/Minutes and seconds Minutes
Fahrenheit/Celsius Fahrenheit
Error Mode On
•Pricesettingvariesbycountry.
•Setyourcountryfrom mode. (Refer How to enter the )
•AfterEEPT,resetyourcountry.(DefaultcountryisAustralia(1))
NOTE

LG RN1840 Series Specifications

General

Brand	LG
Model	RN1840 Series
Category	Dryer
Language	English