63
STACK MACHINE INSTALLATION INSTRUCTIONS
ENGLISH
3. Stacking the machine
1. Lift and stack the upper dryer on the lower model.
2. Remove the screw and disassemble the panels.
3. Fix the upper and lower model using 2 front stacking
kits (①). Fasten two(2) screws in one bracket.
4. Install the rear stacking bracket at the rear of the
stacked models and fasten the five(4) screws.
5. For upper model, change the panel position and
assemble using screws.
6. Assemble the lower model panel with screws.
To Next Page
Loading...
Need help?
General
