Section 1A: Setting Up Service 3
Setting Up Your Phone
1. Install the battery (if necessary).
n
Insert the battery into the opening, making sure the
connectors align. Gently press down to secure the
battery.
2. Press to turn the phone on.
n
If your phone is activated, it will turn on, search for
Sprint service, and enter standby mode.
n
If your phone is not yet activated, or if it is locked, see
“Activating Your Phone”on the following page for
more information.
3. Make your first call.
n
Use your keypad to enter a phone number.
n
Press .
Note
Your phone’s battery should have enough charge to turn on,
find a signal, set up your voicemail, and make a call. You
should fully charge your battery as soon as possible. See
“Charging the Battery”on page 22 for details.
SettingUp Service
To Next Page
Loading...
