To Next Page

To Previous Page

1-5

Only for training and service purposes.

CONNECTING THE WIRELESS SUBWOOFER

Connecting the wireless subwoofer

automatically

After completing installation, the wireless subwoofer

will automatically be connected to the sound bar.

Connect the sound bar to the subwoofer in the fol-

lowing order.

1) Plug the power cable into the wireless subwoofer.

2) Plug the power cable connected to the wireless

subwoofer into an outlet.

3) Plug the power cable into the sound bar.

4) Plug the power cable connected to the sound bar

into an outlet.

5) When the connection is automatically established,

you will see the LED on the back of the wireless

subwoofer light up in green.

Checking the connection with the LED on

the back of the wireless subwoofer

You can check the connection status by looking at the

LED on the back of the wireless subwoofer.

LED Color Status

Blinking green

Connecting in progress

Green Connected successfully

Red

Bad connection,

or the subwoofer is in standby

Off Power cable not connected

Connecting the wireless subwoofer

manually

If you see a red LED on the back of the wireless sub-

woofer, it means that the sound bar is not connected

to the subwoofer. If this is the case, connect them in

the following order.

1) Press the Power button on the sound bar to turn

it off.

2) Press the PAIRING button on the back of the

wireless subwoofer. Check if the LED on the back

of the subwoofer is blinking green. If you still see

a red LED on the wireless subwoofer, press and

hold the button on the back of the subwoofer again.

3) Press the Power button on the sound bar to turn

it on.

4) When the connection is established, you will see

the LED light on the back of the wireless subwoofer

light up in green.

Note

• Install the sound bar as close to the wireless

subwoofer as possible. The closer the distance

between the sound bar and the wireless subwoofer,

the better the sound quality.

• Please ensure there are no obstacles between the

sound bar and the wireless subwoofer.

• To prevent wireless interference, maintain a

distance of at least 1 m (3.3 ft) between the sound

bar or the wireless subwoofer and any peripheral

devices that generate strong electromagnetic waves

(ex. wireless routers, microwave ovens, etc.).

Other manuals for LG S90QY

Owner's Manual81 pages

Simple Manual2 pages

Questions and Answers:

Need help?

Do you have a question about the LG S90QY and is the answer not in the manual?

LG S90QY Specifications

General

USB port	Yes
Ethernet LAN	No
Bluetooth codec	SBC / AAC
Bluetooth version	5
USB 2.0 ports quantity	1
Connectivity technology	Wired & Wireless
Package type	Box
Package depth	261 mm
Package width	1296 mm
Package height	574 mm
Package weight	20800 g
Subwoofer type	Active subwoofer
Subwoofer sensitivity	86 dB
Subwoofer connectivity	Wireless
Woofer diameter (subwoofer)	8 \
Soundbar power consumption	78 W
Power consumption (standby)	0.5 W
Power consumption (typical)	118 W
Subwoofer power consumption	40 W
Color name	Dark Steel Silver
Display type	LCD
Product color	Silver
Audio formats supported	AAC, AAC+, LPCM
Consumer Electronics Control (CEC)	SimpLink
High Dynamic Range (HDR) technology	Dolby Vision, High Dynamic Range 10 (HDR10)
Audio decoders	DTS-HD HR, DTS-HD Master Audio, Dolby Digital Plus, DTS:X, Dolby Atmos, Dolby Digital, DTS Digital Surround, Dolby TrueHD
Equalizer modes	Bass Blast+, Bass Blast, Movie
RMS rated power	570 W
Audio output channels	5.1.3 channels
Front speakers RMS power	90 W
Audio sample rate (24bit)	96 kHz
Center speaker sensitivity	83 dB
Sustainability certificates	ENERGY STAR
Cables included	HDMI
Number of products included	1 pc(s)
Impedance	4 Ω
Number of speakers	9
Soundbar speaker RMS power	350 W