LG SJ2 - Understanding Symbols

Additional Information
Specication
Power requirements
Refer to the main label.
Power
consumption
Refer to the main label.
Networked standby : 0.5 W
(If all network ports are
activated.)
Dimensions
(W x H x D)
Approx.
660.0 mm x 56.0 mm x 99.0 mm
With foot
Bus Power Supply
(USB)
5 V 0 500 mA
Amplier
(Total RMS
Output power)
160 W RMS
Design and specications are subject to change without
notice.
How to disconnect the wireless network
connection or the wireless device
Set up the AUTO POWER ON/OFF function to off and
turn off the unit.
Declaration of Conformity
Hereby, LG Electronics declares that the radio equipment
type Wireless Sound Bar is in compliance with Directive
2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address:
http://www.lg.com/global/support/cedoc/cedoc#
For consideration of the user, this device should be
installed and operated with a minimum distance of
20 cm between the device and the body.
Frequency range Output power (Max.)
2402 to 2480 MHz 10 dBm
5730 to 5821 MHz 13 dBm
About Ferrite Core (Optional)
Wind power cord cable around the ferrite core twice.
SJ2.DEUSLLK_SIM_ENG_MFL70585615.indd 4 2018-08-24  4:31:30