LG SN6Y Simple Manual

Front Panel
The buttons are located on the side.
1 (Standby) ··········Switches the unit ON or OFF.
F (Function) ························Selects function.
p/o (Volume)····················Adjusts volume.
Rear Panel
DC IN····················· Connect to the AC adapter.
USB Port ····················Connect to a USB device.
OPTICAL IN ············Connect to an optical device.
HDMI IN ··········Connect to device with HDMI OUT.
(TV ARC) HDMI OUT··············· Connect to a TV.
• It is recommended that you purchase
a USB gender separately for the
convenience of USB insertion and
extraction. (Recommended USB gender
type : USB 2.0 extension cable)
• Make sure to properly align and connect
the optical cable; improper alignment may
cause damage to the jack.
Subwoofer Connection
Place the wireless subwoofer near the sound bar and
follow steps below.
a Connect the power cord of the sound bar and the
wireless subwoofer to the outlet.
b Turn on the sound bar.
• The sound bar and wireless subwoofer will be
automatically connected. The subwoofer's
green LED turns on.
Manual Subwoofer Connection
If the subwoofer does not make sound, try to
connect manually.
a Press PAIRING on the rear of the wireless
subwoofer.
• The green LED on the rear of the wireless
subwoofer blinks quickly.
(If the green LED does not blink, press and
hold the PAIRING.)
b Turn on the sound bar.
• Pairing is completed. The green LED on the
rear of the wireless subwoofer turns on.
Keep the sound bar and the subwoofer
away from the device (ex. wireless router,
microwave oven, etc.) over 1 m (3.3 ft) to
prevent wireless interference.
!
1 m
(3.3 ft)
SN6Y.DUSALLK_SIM_ENG_MFL71669630.indd 2 2021-01-07   2:41:04

LG SN6Y Specifications

General

Woofer	Yes
Speaker type	3-way
Number of drivers	4
Speaker placement	Floor, Tabletop/bookshelf
Audio output channels	3.1 channels
Number of woofer drivers	1
Audio decoders	DTS Digital Surround, Dolby Digital
RMS rated power	420 W
Audio sample rate (24bit)	96 kHz
Product color	Black
Volume control	Digital
Recommended usage	Home
HDCP version	1.4
Bluetooth version	4.0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired & Wireless
Power source type	USB
Power consumption (standby)	0.5 W
Power consumption (typical)	38 W
Subwoofer power consumption	33 W
Package weight	11802.47 g
Cables included	Optical
Other operating systems supported	Android, iOS
Soundbar speaker RMS power	- W
Subwoofer type	Active subwoofer
Subwoofer location	Separate
Subwoofer connectivity	Wireless
Country of origin	China
Audio formats supported	AAC, AAC+, DTS, FLAC, LPCM, MP3, OGG, WAV

Weight and Dimensions

Depth	436.88 mm
Width	1158.24 mm
Height	226.06 mm
Weight	8754.33 g
Soundbar weight	3447.3 g
Subwoofer depth	292.1 mm
Subwoofer width	180.34 mm
Subwoofer height	391.16 mm
Subwoofer weight	5307 g