26 OPERATION
j Cubed Mini Ice
†
Press and hold the Cubed Mini Ice button for three seconds to turn the Cubed Mini Ice icemaker on/
off.
k Cubed Ice
†
Press the Cubed Ice button to turn the Cubed Ice icemaker on/off.
l Self Care
†
UV light is used to keep the water outlet clean. UV clean function runs automatically for 10 minutes
every hour or can be manually activated at any time.
Press and hold this button for 3 seconds to activate it manually.
• During operation, the function stops if the Water button is pressed. It resumes automatically after 1
hour.
• The function runs automatically for 10 minutes every hour without requiring you to press the Self Care
button.
• UVnano is a compound word derived from the words UV and its unit, a nanometer.
m Lock
The lock function disables every other button on the display.
- When power is initially connected to the refrigerator, the lock function is off.
- To lock the control panel buttons, press and hold the Lock button until the indicator appears in the
display and the function is activated.
- To disable the function, press and hold the Lock button for approximately three seconds.
• Dispenser Control Panel
This feature is only available on some models.
Type A
- Select the desired dispenser mode from the buttons on the dispenser control panel. From left to right,
the icons indicate cubed ice
a, water b, and crushed ice c. Press the dispenser switch with a glass or
other container to dispense cubed ice, water or crushed ice.
Type B
- Select the desired dispenser mode from the Select button on the dispenser control panel. From left to
right, the icons indicate cubed ice a, water b, and crushed ice c. Press the dispenser switch with a
glass or other container to dispense cubed ice, water or crushed ice.
• When the refrigerator is in the Power Saving Mode, the display remains off until a door is opened or a
button is pressed. Once on, the display remains on for 20 seconds.
Display Mode and InstaView Display Mode (For Store Use Only)
Type A Type B
en-us_main.book.book Page 26 Monday, February 20, 2023 9:41 AM
To Next Page
Loading...
