100
•
I can hear rattling noise when the product operates.
12-34. Vibration and Noise #3
Take out unused hangers from the moving hanger and put them on the shelf upside down..
The moving hanger in the Styler performs 200 times of reciprocating motion per minute to improve
the performance of the Styler.
If there are empty hangers on the moving hanger, the product may make rattling noise.
If you hang the clothes on the hanger, the product does not make any noise due to the weight of the
clothes. However, if there are empty hangers, the product makes rattling noise.
Hook the hangers in the grooves of the moving hanger to prevent buttons/accessories in the
clothing from touching the inner surface of the Styler.
Otherwise, the buttons/accessories may collide with the inner surface of the product and produce
noise.
Hang the hangers in a way that they face the same direction.
In the case of hangers with thick shoulder part, hanging them in
a way that they face each other may cause noise because they
bump into each other when the moving hanger moves.
If you have only a small number of clothing, hook them in the
moving hanger in a way that you skip every other groove so that
they don't bump into each other and make noise.
Use the hanger provided with the product. Commercially avail-
able hangers may not t into the groove of the moving hanger
and may produce noise.
When you use commercially available hangers, be sure to use the
hanger with a hook whose thickness is 4 mm or below.
Caution: Commercially available hangers may be damaged
when used with the moving hanger due to their weak durability.
To Next Page
