101
•
I heard that more steam is produced when I use the Styling-Strong option. Doesn't this damage the cloth-
ing?
•
Doesn't the hot steam damage the clothing?
12-35. Clothing Deformation #1
If you select the Styling-Strong option, more steam is produced, but the steam temperature is the same.
Therefore, the amount of moisture permeating the clothing increases, but the steam temperature stays
the same.
There is no possibility that the clothing may be damaged.
The Styling and Sterilization courses produce steam. When the steam generator produces steam, the
temperature of the steam is 100 . However, it cools o rapidly to 60 - 70 as the steam passes through
the pipe and reaches the clothing. This temperature does not damage the clothing and this was proven
by the Korea Apparel Testing and Research Institute.
* However, be careful with the clothing that should not be exposed to water!!
[You can see that the properties of the clothing do not change after using the Styler.]
'Styling Sportswear' course. Certified by the Korea Apparel Testing and Research Institute
Water Resistance
The degree to which the fabric can stand
the water pressure.
Water Repellency
The degree to which the fabric can prevent
water from penetrating.
Water Vapor Permeability
The degree to which the fabric can
prevent moisture from permeating.
Approx. 1600 Approx. 1600
Approx. 5500
Approx. 5400
Approx. 5500
Before
laundry
General
laundry
Styler
Before
laundry
General
laundry
Styler
Before
laundry
General
laundry
Styler
To Next Page
