91
12-25. Problem with Drying #2
•
Clothing is not completely dry after drying. Moisture remains on the clothing.
1. Use the Drying course only after you completely wrung the water from the clothing.
If you do not completely wrung the water from the clothing, time required for drying may be extended,
raising the electric bill. Also, the clothing may not be completely dry even after the Drying cycle.
2. Did you put appropriate amount of clothing inside the styler?
When you dry the clothing, use only up to two clothes at one time in the case of thick clothes and use
up to 4 sheets in the case of towels.
3. Check the lint lter before use.
The lint from the clothing may accumulate on the lter and clog the outlet, lowering the drying per-
formance of the Styler.
Splash
Let's do this at
once.
To Next Page
