24
EN
Option Programme
Spin
• Press the Spin button to change spin strength.
• Press START/PAUSE button to indicate
remaining time.
NOTE
• Always keep the laundry amount to 2 kg or less
and make sure to spread it out evenly.
• Select 60 minutes for cotton laundry and 120
minutes for synthetic fiber laundry for effective
moisture removal.
Rinse
• Press the Rinse button to change the number
of rinses.
Wash
• Press the Wash button to change laundry time.
• Adjusting the wash level setting will modify the
cycle times and/or wash actions. Press the
Wash button until the desired wash level is
selected.
Beeper
• If you want to use the washing machine without
the alarm singal sounds, press the Beeper
button allow you to select: High → Off → Low
→ High respectively.
• Default setting is High.
Water
• Press the Water button to adjust water level.
• This machine detects the quantity of laundry
automatically, then sets Water Level. It may be
necessary to increase the water level manually
when washing bulky light weight clothes.
• When you select a wash programme, the
Water Level will be shown on the control panel.
• When Water Level is automatically detected, it
may differ depending on the quantity of laundry
even though the same Water Level is indicated
on the control panel.
• Water level can be changed when operation is
paused.
Air Dry
When you select Air Dry, you can reduce the
drying time by minimizing the moisture is the
laundry.
• Air Dry selection lights up in sequence as
follows : Tub Dry → 60 → 90 → 120 → Tub
Dry as the button is pushed.
Soak
Soak can be selected to wash heavily soiled
laundry by soaking in water for some time to
remove dirt and grime.
1
Press the POWER button.
2
Select a washing programme.
3
Press the Wash button until the light turns
on "Soak” and “Wash” simultaneously as
next image.
4
Press the START/PAUSE button.
W
To Next Page
Loading...
Need help?
General
