27
OPERATION
ENGLISH
Manual Washing
When you need a rinse and spin, spin only, rinse only or wash only cycle, these can be set manually.
• When you set a washing cycle manually such as rinse only, wash only or wash and rinse, the water will
not be drained out after the wash is completed. If you wish to drain the water, select a spin only cycle
after the wash has completed.
• If a rinse only cycle is selected, the water supply begins after detecting the load and the cycle will start.
However the water will still fill to the selected water level even if there is water already in the tub.
• If you do not select or change the
Water Level
, the water level will be set automatically.
Spin only Rinse and Spin Rinse only Wash and Rinse Wash only
1
s
or
t
Press the
POWER
button.
2
Press the
Process
button.
Press the
Process
button 2 times.
Press the
Process
button 3
times.
Press the
Process
button 4 times.
Press the
Process
button 5
times.
3
Spin is
automatically
selected.
Rinse and spin are
automatically
selected.
Rinse is
automatically
selected.
Wash and rinse
are automatically
selected.
Wash is
automatically
selected.
4
u
Press the
START/PAUSE
button to start the cycle(s).
To Next Page
Loading...
Need help?
General
