24
EN
Option Programme
Soil Level
• This button allows you to select the strength of
the wash action.
• There are 2 levels for soil level selection:
Heavy and Light. This can be selected for any
programme.
• If you do not select this option, it will be in the
Normal state with the light turned off.
• Adjustment can be made while washing.
Beeper
• If you want to use the washing machine without
the alarm signal sounds, press the Beeper
button allow you to select: High → Off → Low
→ High respectively.
• Default setting is High.
Water Level
• Press the Water Level button to adjust water
level.
• It can be changed during operation.
• This machine detects the quantity of laundry
automatically, then sets Water Level. It may be
necessary to increase the water level manually
when washing bulky light weight clothes.
• When you select a wash programme, the
Water Level will be shown on the control panel.
• When Water Level is automatically detected, it
may differ depending on the quantity of laundry
even though the same Water Level is indicated
on the control panel.
Wash
• Press the Wash button to change laundry time.
• Adjusting the wash level setting will modify the
cycle times and/or wash actions. Press the
Wash button until the desired wash level is
selected.
Rinse
• Press the Rinse button to change the number
of rinses.
Spin
• Press the Spin button to change spin strength.
• Press START/PAUSE button to indicate
remaining time.
To Use the Air Dry Function
When you select Air Dry, you can reduce the
drying time by minimizing the moisture that
remains within the clothes.
• Press the Spin button for 3 seconds to select
and press the POWER button to deselect.
NOTE
• Always keep the laundry amount to 2 kg or less
and make sure to spread it out evenly.
To Next Page
Loading...
