10
5
INSTALLATION INSTRUCTIONS
Level the dryer
1. Levelling the dryer is to prevent undesirable
noise and vibration.
When placing your dryer in an solid and level
area where water is not dripping and freezing,
flammable materials are not stored.
2. If the dryer is not properly level, adjust the front
levelling legs up and down as necessary.
Turn them clockwise to raise and
counterclockwise to lower until the dryer is not
wobbling both front-to-back and side-to-side.
❊ Diagonal Check
When pushing down the edges of the washing machine,
the machine should not move up and down at all. (Please,
check both of two directions)
If machine rocks when pushing the machine top plate
diagonally, adjust the feet again.
Adjustable feet
Adjustable feetAdjustable feet
Raise Lower
To Next Page
Loading...
