30
ENGLISH
General
Power LED
When the Power LED function is turned on, it operates as follows :
On The power LED turns on automatically.
Off The power LED turns off.
Sleep Mode
(Standby Mode)
Blinking. (only 27GR82Q)
Automatic Standby
Feature that automatically turns off the monitor when there is no movement on the screen for a period of time. You can set
a timer for the auto-off function. (8H, 6H, 4H and Off) (27GR83Q)
If there is no operation on the monitor for a certain period of time, the monitor will automatically switch to standby mode.
(27GR82Q)
Input Compatibility
Version (27GR83Q)
Please set the Input Compatibility Version to match the version of the connected external device.
HDMI
2.1(PC)/2.1(AV)/1.4
If you want to use the HDR, select the Input Compatibility Version to 2.1(PC) or 2.1(AV).
DisplayPort
1.4(DSC)/1.4/1.2
If you want to use the HDR, select the Input Compatibility Version to 1.4(DSC) or 1.4.
NOTE
• If the connected device supports 2.1 in HDMI but the screen or sound does not work properly, set this function to 2.1(AV).
HDMI Compatibility
Mode (27GR82Q)
HDMI Compatibility Mode feature can recognize the legacy equipment that does not support HDMI 2.0.
On Enables HDMI Compatibility Mode.
Off Disables HDMI Compatibility Mode.
NOTE
• If the connected device does not support [HDMI Compatibility Mode], the screen or sound may not work properly.
• When HDMI Compatibility Mode is on, 2560x1440@100/120/144Hz resolution is not supported.
• Some older graphics cards do not support HDMI 2.0,but you can select HDMI 2.0 resolution in the control panel of window.
This may cause the screen to appear abnormally.
To Next Page
Loading...
