12
WIRING CONNECTION
ENGLISH
Connecting the cable
Indoor unit
* The inside and outside connecting cable can be connected after opening the inlet grille.
1 Open the inlet grille manually.
2 Open the control cover with Driver(⊕)
3 Connect the cables to the connector in the control box.
4 Secure the control cover to the original position with the screw.
5 Close the inlet grille.
WIRING CONNECTION
<1Ø, 220~240V>
Indoor unit
Outdoor unit
POWER SUPPLY
1Ø 220~240V 50/60Hz
<3Ø, 380~415V>
Indoor unit
Outdoor unit
POWER SUPPLY
3Ø 380~415V 50/60Hz
To Next Page
