5
Installation
Connecting the Product
After completing installation, plug the sound bar power cable into an outlet in the following order.
a Plug the power cable into the AC adapter.
b Connect the AC adapter cable to the DC IN (AC adapter input) terminal on the back of the product.
c Plug the power cable connected to the AC adapter into an outlet.
d When the connection is automatically established, you will see the LED1 blinks red.
Note
• Make sure to use the provided AC adapter. Using other AC adapters may lead to malfunction and will forfeit the
product warranty.
• To prevent wireless interference, maintain a distance of at least 1 m between the sound bar and any peripheral
devices that generate strong electromagnetic waves (ex. wireless routers, microwave ovens, etc.).
Installation
To Next Page
Loading...
Need help?
General
