LG V-net PDRYCB000

Administrator Guide
14 Dry Contact
* Function
It gives selection whether to turn ON the unit directly or not from the external source.
The selection can be made by pressing CANCEL button of the wireless remote controller
3 times within 3 minutes of resetting the unit with facing it towards the unit.
(This function availability depends on indoor unit model)
1. To turn ON the unit directly from the external source
2. Not to turn ON the unit directly from the external source.
Only to activate the system.
Administrator Guide
If the power gives out, the Air conditioner may be run to before state after
power returns because Air conditioner's function of interruption of electric
power compensation.
ON
OFF
CANCEL
AUTO CLEAN
SET
CANCEL Button
*Note
This function(Dry contact mode setting) doesn't work in some wired remote controller.
For more information, please refer to manual of wired remote controller.