LG W1943C User Manual

A3
Connecting the Display
Important
This illustration depicts the general model of connection. Your monitor may differ from
the items shown in the picture.
Do not carry the product upside down holding only the stand base. The product may
fall and get damaged or injure your foot.
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
Connecting the stand
1. Place the monitor with its front facing downward on a soft cloth.
2. Assemble the Stand Base(Front, Rear) into the Stand Body in the correct direction.
3. Tie down the base lock to perpendicularity direction.
4
.
Once assembled take the monitor up carefully and face
the front side
Stand Body
Stand Base

LG W1943C Specifications

General

Pixel pitch	0.300 x 0.300 mm
Aspect ratio	-
Display diagonal	18.5 \
Display resolution	1366 x 768 pixels
Vertical scan range	56 - 75 Hz
Viewing angle, vertical	50 °
Contrast ratio (dynamic)	50000:1
Viewing angle, horizontal	90 °
Display brightness (typical)	200 cd/m²
DVI-I ports quantity	0
Power consumption (standby)	1 W
Power consumption (typical)	21 W
Product color	Black
LED indicators	Stand-by
Panel mounting interface	75 x 75 mm
Package weight	4300 g

Weight and Dimensions

Depth (without stand)	183 mm
Width (without stand)	448.9 mm
Height (without stand)	361.1 mm
Weight (without stand)	2900 g