A21
Specifications W2042PE
Display
Sync Input
Video Input
Resolution
Plug&Play
Power
Consumption
Dimensions
& Weight
Tilt Range
Power Input
Environmental
Conditions
Stand Base
Power cord
20.1 inches (51.1 cm) Flat Panel Active matrix-TFT LCD
Anti-
Glare coating
Visible diagonal size: 51.1 cm
0.258*0.258 mm pixel pitch
Horizontal Freq. Analog : 30 - 83 kHz (Automatic)
Digital : 30 - 83 kHz (Automatic)
Vertical Freq. 56 - 75 Hz (Automatic)
Input Form Separate TTL, Positive/Negative
SOG (Sync On Green), Digital (HDCP)
Signal Input 15 pin D-Sub Connector
DVI - D connector (Digital)
Input Form RGB Analog (0.7 Vp-p/ 75 ohm), Digital
Max Analog : VESA 1680 x 1050 @60 Hz
Digital : VESA 1680 x 1050 @60 Hz
Recommend VESA 1680 x 1050 @60 Hz
DDC 2B
With Stand Without Stand
Width 47.39 cm / 18.65 inches 47.39 cm / 18.65 inches
Height 40.99 cm / 16.31 inches 31.89 cm / 12.55 inches
51.99 cm / 20.46 inches
Depth 24.16 cm / 9.51 inches 5.84 cm / 2.29 inches
Net 4.64 kg (10.31 lbs)
Tilt -6˚~ 17˚
AC 100-240V~ 50/60Hz 1.0A
Operating Conditions
Temperature 10˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions
Temperature -20˚C to 60 ˚C
Humidity 5 % to 90 % non-Condensing
Attached ( ), Detached ( O )
Wall-outlet type or PC-outlet type
NOTE
Information in this document is subject to change without notice.
On Mode
:
22W(Typ.)
Sleep Mode ≤ 0.3W(Typ.)
Off Mode ≤ 0.3W
To Next Page
Loading...
