Press the button to reset immediately.
If this does not improve the screen image, restore the factory default setting
s.
If necessary, perform the white balance function again. This function will be enabled only when
the input signal is an analog signal.
SETUP
To choose the language in which the
control names are displayed.
To adjust position of the OSD window
on the screen.
LANGUAGE
OSD
POSITION
WHITE
BALANCE
FACTORY
RESET
If the output of the video card is different
the required specifications, the color
level may deteriorate due to video
signal distortion. Using this function, the
signal level is adjusted to fit into the
standard output level of the video card
in order to provide the optimal image.
Activate this function when white and
black colors are present in the screen.
If you set ,you enable the Response
Time Control function.
POWER
RTC
INDICATOR
Restore all factory default settings except
"LANGUAGE."
Use this function to set the power
indicator on the front side of the moni
tor
to ON
ON
If you set ,you disenable the
Response Time Control function.
OFF
or OFF.
If you set OFF, it will go off.
If you set ON at any time, the power
indicator will automatically be turned on.
,
SETUP
MENU : Exit
: Adjust
: Adjust
SET : Select another
sub-menu
-
+
On Screen Display(OSD) Selection and Adjustment
A14
Main menu Sub menu Description
To Next Page
Loading...
