Specifications W2252TQ
Display
Sync Input
Video Input
Resolu
tion
Plug&P
lay
Po
wer
Consumption
(without speaker)
Dimensions
&Wei
ght
Tilt Ra
nge
Power In
put
Environme
ntal
Conditions
Stand Base
Signal c
able
Power co
rd
22 inches (55.868 cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
22 inches viewable
0.282*0.282 mm pixel pitch
Horizontal Freq. Analog : 30 - 83 kHz (Automatic)
Digital : 30 - 83 kHz (Automatic)
Vertical Freq
. 56 - 75 Hz (Automatic)
Input Form Separate TTL, Positive/Negative
SOG (Sync On Green)
Digital
Signal Input 15 pin D-Sub Connector
DVI - D connector (Digital)
Input For
m RGB Analog (0.7 Vp-p/ 75 ohm), Digital
Max Analog : VESA 1680 x 1050 @60 Hz
Digital : VESA 1680 x 1050 @60 Hz
Recommend VESA 1680 x 1050 @60 Hz
DDC 2B(Digital),DDC 2AB(Analog)
On Mode
: 40W(Typ.)
Sleep Mod
e ≤ 1 W
Off Mode ≤ 1 W
With Stand Without Stand
Width 51.90 cm / 20.43 inches 51.90 cm / 20.43 inches
Height 42.70 cm / 16.81 inches 39.60 cm / 15.59 inches
Dept
h 22.00 cm / 8.66 inches 7.90 cm / 3.11 inches
Net 4.4 kg (9.7 lbs)
Tilt -5˚~20˚
AC 100-240V~ 50/60Hz 1.0A
Operating Conditions
Temperatur
e 10˚C to 35 ˚C
Humidit
y 10 % to 80 % non-Condensing
Storage Conditions
Temperatur
e -20˚C to 60 ˚C
Humidit
y 5 % to 90 % non-Condensing
Attached ( ), Detached ( O )
Attached ( ), Detached ( O )
Wall-outlet type or PC-outlet type
NOTE
Information in this document is subject to change without notice.
A22