Connecting the stand
]. Place the monitor with its front faring downward on a soft cloth
2. Assemble the stand base into stand body in the correct direction as shown in
the picture, then tighten the screw which is attached to the stand base
StandBase
StandBody Screw
3. Once assembled take the monitor up carefully and face the front side
Disassembling the stand
]. Place the monitor face down on the cushion or soft cloth
2. Loosen the screw which is attached to the stand base, then take offthe stand base
from stand body
StandBody StandBase
Screw
To Next Page
Loading...
