To Next PageTo Next PageHow to stop humming noise while playing DVD or CD on LG Home Theater System?
If you hear a humming noise while playing a DVD or CD on your LG Home Theater System, first clean the disc using a soft cloth with outward strokes. If that doesn't help, the DVD receiver might be too close to the TV, causing feedback. Try moving the DVD receiver and audio components further away from your TV.
What to do if a DVD/CD will not play on my LG Home Theater System?
If your LG Home Theater System isn't playing a DVD or CD, start by ensuring a disc is actually inserted, and that it's a playable disc (check the disc type, color system, and regional code). Make sure the disc is inserted correctly with the label or printed side facing up. Also, if the menu is open on the screen, press SETUP to close it. Finally, a parental lock may be preventing playback; in this case, enter your password or change the rating level.
Why is there no picture on my LG Home Theater System?
If you're not seeing a picture from your LG Home Theater System, it could be that your TV isn't set to the correct video input. Make sure you've selected the right input mode on your TV so that the picture from the DVD Receiver appears. Also, check that the video cables are securely connected to both the TV and the DVD Receiver.
Why is there no sound from my LG Receiver?
If you are experiencing no sound or very low sound from your LG Receiver, consider the following: * The equipment connected with the audio cable might not be set to receive DVD audio. Select the correct input mode on the equipment. * The audio cables may not be securely connected. Ensure the audio cables are properly connected to the jacks. * The connected equipment's power may be off. Turn on the equipment connected with the audio cable. * The audio connecting cable might be damaged. Replace it with a new one.
How to fix LG W93-T remote control that does not work?
If the remote control for your LG Receiver isn't working correctly, here are a few things to check: * Make sure the remote control is pointed at the remote sensor on the DVD/CD Receiver. * Ensure you are using the remote control within about 23 ft (7 m) of the receiver. * Check for any obstacles between the remote control and the receiver and remove them. * The batteries in the remote control might be dead. Try replacing them with new ones.
How to fix no picture on my LG Home Theater System?
If your LG Home Theater System shows no picture, ensure the TV is set to the correct video input mode to receive the DVD signal. Also, check that the video cables are securely connected to both the TV and the DVD receiver.
How to fix LG Home Theater System when there is little or no sound?
If you're experiencing little to no sound with your LG Home Theater System, verify that the equipment connected via the audio cable is set to receive the DVD signal output by selecting the correct input mode on the audio receiver. Also, ensure the audio cables are securely connected to the speakers or receiver. If the audio cables are damaged, replace them.
How to fix LG Receiver when there is little or no sound?
If you're experiencing little or no sound from your LG Receiver, ensure that the equipment connected via the audio cable is set to receive the DVD signal output by selecting the correct input mode on the audio receiver. Check that the audio cables are securely connected to the speakers or receiver. If the issue persists, the audio cables may be damaged and need replacement.
General| Brand | LG |
|---|---|
| Model | W93-T |
| Type | Receiver |
| Frequency Response | 20Hz - 20kHz |
| Input Sensitivity | 200mV |
| Signal-to-Noise Ratio | 80dB |
| Dimensions | 430 x 155 x 325 mm |
| Weight | 8.5 kg |
Experience Full HD picture quality with simple setup.
Achieve vivid 5.1ch surround sound from TV, DVD, and Digital Devices.
Instructions for attaching speakers to their stands.
How to connect speakers to the wireless receiver unit.
Important precautions and tips for setting up the system.
Guide for connecting speaker cables to the DVD receiver.
Steps to connect the wireless transmitter to the main unit.
Connect HDMI output from source device to unit's HDMI input.
Connect unit's HDMI output to TV's HDMI input.
Adjust video output resolution for component and HDMI.
Buttons for playback, menu navigation, and selection.
Buttons for audio modes, setup menu, and input sources.
Instructions for inserting batteries into the remote control.
Connection ports and power button on the front panel.
Buttons for disc management and function selection.
Buttons for playback, tuning, skip/search, and volume.
Adjust screen aspect ratio and video output resolution.
Set speaker levels, distances, and test output.
Compensate for audio delay with digital TV signals.
Select Virtual Sound Matrix and Dolby Pro Logic II modes.
Understand DivX file compatibility and subtitle display.
Display MP3/WMA info and check file compatibility.
Understand specifications for compatible JPEG photo files.
Listen to surround sound and exit mode.
Solutions for no power, no picture, or low sound.
Fixes for disc errors, noise, and poor radio reception.
Troubleshoot remote control and other common malfunctions.
