To Next Page
P
Pamela MurphySep 6, 2025
What does EEPROM ERROR mean on my LG Washer?
- NNoah WardSep 6, 2025
An EEPROM ERROR on your LG Washer means that the EEPROM is out of order.
What does EEPROM ERROR mean on my LG Washer?
An EEPROM ERROR on your LG Washer means that the EEPROM is out of order.
What does PRESSURE SENSOR ERROR mean on my LG WD-11270BD Washer?
A PRESSURE SENSOR ERROR on your LG washer indicates that the SENSOR SWITCH ASSEMBLY is out of order.
What causes a BALL SENSOR ERROR on my LG WD-11270BD Washer?
A BALL SENSOR ERROR on your LG Washer is caused by a loose ball sensor connector or a faulty ball sensor.
What does a DRAIN ERROR mean on my LG Washer?
A DRAIN ERROR on your LG washer means that the water hasn't fully drained within 10 minutes.
What causes an OVER CURRENT ERROR on my LG WD-11270BD Washer?
An OVER CURRENT ERROR on your LG Washer can be caused by a faulty MAIN PWB ASSEMBLY or a short-circuited winding in the STATOR ASSEMBLY.
What does WATER INLET ERROR mean on my LG Washer?
A WATER INLET ERROR on your LG washer means that the correct water level isn't reached within 8 minutes after water is supplied, or it doesn't reach the preset water level within 25 minutes.
What causes a LOCKED MOTOR ERROR on an LG WD-11270BD?
A LOCKED MOTOR ERROR on your LG Washer can be caused by several issues: * The MOTOR HARNESS connector is not connected to the STATOR ASSEMBLY connector. * Poor electrical contact between the MOTOR HARNESS and the MAIN PWB ASSEMBLY connectors. * A cut in the MOTOR HARNESS between the STATOR ASSEMBLY and MAIN PWB ASSEMBLY. * A defective hall sensor.
What causes a DOOR OPEN ERROR on an LG WD-11270BD Washer?
A DOOR OPEN ERROR on your LG washer indicates that the door isn't completely closed, there are loose electrical connections at the door switch and PWB assembly, or the DOOR SWITCH ASSEMBLY is faulty.
Why does my LG WD-11270BD show an IMBALANCE ERROR?
An imbalance error on your LG washer can occur if the load is too small, the appliance is tilted, laundry is gathered to one side, or non-distributable items are in the drum.
How to fix rattling noise in LG WD-11270BD?
If your LG Washer is making rattling, clanking, thumping, or vibrating noises, stop the washer and inspect the drum and drain filter. If the noise continues after restarting, it may require service. If the sound persists, the washer might be unbalanced; stop it and redistribute the wash load. Ensure all four leveling feet are firmly in contact with the floor during the spin cycle.
General
