19
ow to use washer
H
Rapid
1. Rapid
• By pressing the Rapid
button, Rapid function is
selected.
• Rapid function reduces the whole time
including the washing and rinsing time
about by half an hour.
• Rapid is available in Whites, Coloureds
program.
If lamp turns on, that function has been selected.
Start/Pause
• This Start/Pause button is used to start
wash cycle or pause the cycles.
• If temporary stop of wash cycle is needed,
push “Start/Pause” button.
• After the pause button is pressed, the power
is turned off automatically 4 minutes later.
1. Start
2. Pause
Programme
• 9 programs
are available
according to
the laundry
type.
1. Program
2. Course
• When Start/Pause button is pushed,
Coloureds program is automatically selected.
- By turning the Program dial, the program is
selected in orders of “Coloureds
U
Synthetic
U
Delicate
U
Wool
U
Hand Wash
U
Rinse+Spin
U
Spin
U
Pump
U
Whites”.
Regarding to the laundry type for each program
Please refer to the page13.
- Whites
- Coloureds
- Synthetic
- Delicate
- Wool
- Hand Wash
- Rinse+Spin
- Spin
- Pump
(Programme)
1. Power
2. Initial Program
Power
• Press the Power button to turn power on
and off
• To cancel the Time Delay function, it
can also be used.
• When the Power button is pushed, the
washer is ready for Coloureds program.
And the other initial conditions as follows.
• So, if you want to advance into the
washing cycle without selecting the
program, just push Start/Pause button
and then the washer will proceed.
Initial program
- Coloureds Program / Main wash /
Normal Rinse/800 rpm / 40˚C
To Next Page
Loading...
Need help?
General
