To Next PageTo Next PageWhy is the duration delayed on my LG WD20VV2S6?
If the duration of a cycle on your LG Washer is delayed, this is normal. The time remaining shown on the display is an estimated duration, and the actual time may vary depending on various factors.
Why is the cycle time longer than usual on my LG WD20VV2S6?
If the cycle time on your LG Washer is longer than usual, try adding more items to the load to help the appliance balance the laundry. Always wash items with similar weights together to ensure even weight distribution during spinning. If items become tangled during the cycle, manually redistribute them to improve balance.
What causes rattling noise in LG WD20VV2S6 Washer?
If your LG Washer is making a rattling and clanking noise, stop the appliance immediately and check the drum for any foreign objects that may be causing the noise.
Why is my LG Washer not drying clothes properly?
If your LG Washer is not drying, try drying again using the Time Dry cycle. You can also hang the clothes in a cool place to air dry. Check the load capacity for the selected cycle and, if necessary, add a Time Dry cycle. Rearrange the clothes and use the Time Dry cycle. Select the highest spin speed allowed for the washing cycle. Check if the water supply tap is closed and ensure the drain pump filter isn't clogged.
Why is my LG Washer making a vibrating noise?
If your LG Washer is making vibrating noises, start by removing any packaging materials that may still be attached to the appliance. Pause the cycle and redistribute the laundry after the door unlocks to ensure the load is balanced. Also, make sure the floor is solid and doesn't flex. Consult the Levelling the Appliance section to adjust the leveling of the appliance.
What to do if my LG WD20VV2S6 Washer does not operate?
If your LG Washer is not operating, first, press the Power button to turn it on. Also, ensure the power cord is securely plugged into a working outlet and that the water supply tap is fully turned on. Make sure that the cycle is correctly set. Close the door and press the Start/Pause button. Also, ensure that nothing is caught under the door preventing it from closing completely. Check house circuit breakers/fuses and replace fuses or reset the breaker if needed. If the issue persists, press the Power button, reselect the desired program, and press the Start/Pause button again. Check another tap in the house to ensure adequate household water pressure. Note that the drum may stop temporarily during certain cycles while water is safely heated.
How do I fix the OE WATER OUTLET ERROR on my LG WD20VV2S6 Washer?
If your LG Washer displays an 'OE WATER OUTLET ERROR', you should clean and straighten the drain hose to ensure there are no kinks or blockages. Additionally, check and clean the drain filter to remove any debris that may be obstructing water flow.
How to fix a 1E INLET ERROR on my LG Washer?
If your LG Washer displays a '1E INLET ERROR', try the following: Check another tap in the house to ensure there isn't a general water supply issue. Fully open the tap connected to the washer. Straighten any kinks in the water inlet hose, or reinstall it to ensure proper connection. Inspect and clean the filter of the inlet hose to remove any blockages. If the problem continues, consider replacing the aqua stop supply hose.
Why is the drying performance too low on my LG Washer/Dryer?
If the drying performance of your LG Washer/Dryer is too low or bad, ensure that the water supply tap is open, as water is used for auto-cleaning of the lint-filter on the drum during drying. Also, make sure the drain filter is not clogged, allowing water to drain properly. Check the load capacity for the selected program; if necessary, add a time dry program. Select the highest spin speed allowed for the wash program.
Why is the drying time too long on my LG WD20VV2S6 Washer/Dryer?
If the drying time is too long on your LG Washer/Dryer, the ambient temperature might be low. Make sure the temperature is within the allowable range.
General
