34
PUMP
HEATER
Disassemble the cabinet cover.
1.
Separate the pump hose, the bellows and the
circulation hose assembly from the pump
assembly.
2.
Disassemble the pump assembly in arrow
direction.
3.
Disassemble the cabinet cover.
1.
Separate 2 connectors from the heater.
2.
Loose the nut and pull out the heater.
3.
• When assembling the heater, insert the heater
into heater clip on the bottom of the tub.
• Tighten the fastening nut so the heater is
secure.
CAUTION
CIRCULATION
HOSE
PUMP HOSE
BELOWS
To Next Page
Loading...
