To Next PageTo Next PageWhat does WATER INLET ERROR mean on my LG WM2077C?
A WATER INLET ERROR on your LG washer means that the correct water level isn't reached within 8 minutes after water is supplied, or it doesn't reach the preset water level within 25 minutes.
What does an over current error mean on my LG Washing machine?
If your LG Washing machine shows an over current error, it means that either the MAIN PWB ASSEMBLY is out of order or the winding in the STATOR ASSEMBLY is short-circuited. Check both the MAIN PWB ASSEMBLY and STATOR ASSEMBLY.
What causes a DOOR OPEN ERROR on an LG Washer?
A DOOR OPEN ERROR on your LG washer indicates that the door isn't completely closed, there are loose electrical connections at the door switch and PWB assembly, or the DOOR SWITCH ASSEMBLY is faulty.
Why is my LG Washing machine showing a heating error?
If your LG Washing machine is displaying a heating error, it indicates that the THERMISTOR is out of order. Check or replace the THERMISTOR.
What to do if my LG Washing machine shows a pressure sensor error?
If your LG Washing machine displays a pressure sensor error, check the SENSOR SWITCH ASSEMBLY.
What does THERMISTOR ERROR mean on my LG WM2077C Washer?
A THERMISTOR ERROR indicates that the THERMISTOR is out of order.
What to do if my LG WM2077C Washer is leaking?
If you're experiencing water leaks with your LG Washer, or if water isn't entering or draining properly, check the fill hose connections at the tap and washer and tighten them if loose. Ensure your house drain pipes are not clogged, and contact a plumber if needed. Reduce the amount of detergent you're using, or switch to a low-sudsing detergent if you notice excessive suds. Confirm that your water supply is adequate by checking another tap in the house and fully opening the water supply tap. Straighten any bent water inlet hoses and check the filter of the inlet hose. Finally, inspect the drain hose for any bends or clogs, and clean the drain filter if it's clogged.
Why my LG WM2077C does not start?
If your LG Washer doesn't start or won't spin, ensure the power cord is securely plugged into the wall outlet. Check your house fuse or circuit breaker, and reset it if necessary. Make sure the water supply tap is turned on. Also, verify that the door is firmly shut; press the Start/Pause button, keeping in mind that it may take a few moments for the washer to begin spinning after the door locks.
What to do if my LG WM2077C is leaking water?
If you notice water leaks from your LG washer, here are some potential causes and solutions: * Check if the fill hose connection is loose at the tap or washer and tighten it. * Ensure that house drain pipes are not clogged. Unclog the drain pipe or contact a plumber if necessary. * Too much or unsuitable detergent can cause leaks. Reduce the amount of detergent or switch to a low-sudsing detergent. * Verify that the water supply is adequate in your area by checking another tap in the house. * Make sure the water supply tap is fully open. * Inspect the water inlet hose for any bends and straighten it. * Check the filter of the inlet hose for clogs. * Examine the drain hose for bends or clogs and clean and straighten it. * Clean the drain filter if it is clogged.
Why won't my LG WM2077C start?
The LG washer might not start due to several reasons: * The power cord may not be properly plugged in. Ensure the plug fits tightly into the wall outlet. * A blown fuse or tripped circuit breaker could be the issue. Reset the circuit breaker or replace the fuse. Do not increase fuse capacity. If it's a circuit overload, consult a qualified electrician. * The water supply tap might not be turned on. Make sure to turn it on. * The door might not be firmly shut. Close the door properly and press the Start/Pause button. Note that it may take a few moments for the washer to begin spinning after pressing the button, as the door must lock first.
General
