12
• Use this button to turn the power
On/Off.
• Rotate the Cycle selector
knob to select the cycle
designed for different
types of fabric and soil
levels.
•
Allows you to store a customized wash cycle for future use.
• To create a Custom Program:
1) Select a cycle.
2) Select the other desired Wash/Rinse Temp., Spin Speed, Soil Level.
3) Select the desired Options.
4) Press and hold the Custom Program button for 3 seconds (2 beep sounds).
The Custom Program is now stored for future use.
• To reuse the program, select Custom Program and press Start/Pause .
• Use this option to prevent
Press and hold PRE WAS
lock/unlock control.
• When Child lock is set, CH
buttons are disabled exce
can lock the washer while
• Use this button to Start/
Stop the washer.
• Se
lo
• To
bu
op
• To
bu
• Pr
• This display shows:
a) the estimated time remaining in the
cycle when operating.
b) an error code when an error has been
detected.
To Next Page
Loading...
