To Next PageTo Next PageWhat does it mean if my LG Washer shows a LOCKED MOTOR ERROR?
A LOCKED MOTOR ERROR in your LG Washer can be caused by several issues: 1. The MOTOR HARNESS connector is not connected to the STATOR ASSEMBLY connector. 2. Bad or unstable electrical contact between connectors in the MOTOR HARNESS and the MAIN PWB ASSEMBLY. 3. The MOTOR HARNESS between the STATOR ASSEMBLY and MAIN PWB ASSEMBLY is cut. 4. The hall sensor is defective.
Why does my LG Washer have a DOOR OPEN ERROR?
A DOOR OPEN ERROR can occur in your LG Washer if the door is not completely closed, there are loose electrical connections at the door switch and PWB assembly, or the DOOR SWITCH ASSEMBLY is out of order.
Why does my LG WM2277H show an IMBALANCE ERROR?
An IMBALANCE ERROR on your LG Washer can be triggered if the load is too small, the appliance is tilted, laundry is gathered to one side, or non-distributable items are in the drum.
What causes a HEATING ERROR in my LG WM2277H Washer?
A HEATING ERROR in your LG Washer is caused by the THERMISTOR being out of order.
What does it mean if my LG Washer displays an OVER CURRENT ERROR?
An OVER CURRENT ERROR in your LG Washer indicates that the MAIN PWB ASSEMBLY is out of order or the winding in the STATOR ASSEMBLY is short-circuited.
What causes a PRESSURE SENSOR ERROR on my LG Washer?
A PRESSURE SENSOR ERROR on your LG Washer means that the SENSOR SWITCH ASSEMBLY is out of order.
What does it mean when my LG WM2277H Washer displays a BALL SENSOR ERROR?
A BALL SENSOR ERROR in your LG Washer can be caused by a loose Ball Sensor Connector or the Ball Sensor being out of order.
What does EEPROM ERROR mean on my LG Washer?
An EEPROM ERROR means that the EEPROM is out of order.
General| Type | Front Load Washer |
|---|---|
| Energy Star Certified | Yes |
| Spin Speed | 1300 RPM |
| Steam Cleaning | Yes |
| Color | White |
| Wash Cycles | 10 |
| Voltage | 120V |
| Control Type | Electronic |
| Water Level Settings | 5 |
Essential precautions to minimize risks of fire, shock, injury, or damage.
Details on proper grounding to reduce electric shock risk.
Instructions for managing shipping bolts during installation.
Step-by-step guide to remove shipping bolts and braces.
Importance of a solid, level floor for stability and noise reduction.
Specifications for the electrical outlet and connection.
Guidelines for connecting the power cord safely.
Procedures for connecting the water inlet hoses correctly.
How to install the drain hose for proper water discharge.
Steps to ensure the washer is level for optimal performance.
Emphasizes using High Efficiency (HE) detergents for optimal performance.
Procedure for cleaning the filter that supplies water to the washer.
Steps to clean the filter that collects debris from the drain.
Solutions for rattling, thumping, and vibrating noises.
Causes and solutions for water leaks from the washer.
How to address problems caused by too much detergent.
Diagnosing problems with water filling the washer.
Solutions for slow or no water drainage.
Troubleshooting steps when the washer fails to power on.
Addressing issues where the washer does not spin.
Solutions for the UE error code indicating an unbalanced load.
