What to do when my LG WM22WV26SR Washer shows PF power failure?
If your LG Washer displays 'PF POWER FAILURE', a power failure or inadequate electrical service may have occurred during operation. Press the Start/Pause button to restart the cycle.
Why is my LG WM22WV26SR leaking water?
If your LG Washer is leaking water, there could be several reasons. Start by checking if the house drain pipes are clogged and unclog them if necessary. Also, inspect the drain hose for improper installation or clogs; clean and straighten it, and regularly check the drain filter. Ensure the drain pump filter cap is correctly fitted. Finally, make sure the water supply is fully turned on.
Why does my LG WM22WV26SR Washer not operate?
If your LG Washer is not operating, check the house circuit breakers or fuses and replace them or reset the breaker if needed. The appliance should be on a dedicated branch circuit. If the control needs to be reset, press the Power button, reselect the desired program, and press Start/Pause. Also, ensure the Start/Pause button was pressed after setting a program. Check that household water pressure is adequate by checking another tap in the house.
Why is my LG WM22WV26SR Washer not filling properly?
If your LG Washer is not filling properly, ensure the inlet filters on the fill valves are not clogged and that the inlet hoses are not kinked or clogged. Make sure that both hot and cold water taps are turned on fully and check the supply hose connections to ensure they are not reversed.
Why is the cycle time longer than usual on my LG WM22WV26SR?
If the cycle time is longer than usual on your LG Washer, it could be due to a load that is too small; add more items to allow the appliance to balance the loads. If heavy articles are mixed with lighter items, always try to wash articles with similar weight in order to allow the appliance to evenly distribute the weight of the load for spinning. If the load is out of balance, manually redistribute the load if articles have become tangled.
What causes staining in my LG Washer?
Staining in your LG Washer can occur if bleach or softener is dispensed too soon because the dispenser compartment is overfilled, so always measure bleach or softener to prevent overfilling. Also, it can happen if bleach or softener was added directly to the clothes in the drum, so always use the detergent dispenser to ensure that bleach or softener is properly dispensed at the right time in the programme.
What to do if my LG WM22WV26SR shows OE water outlet error?
If your LG Washer displays an 'OE WATER OUTLET ERROR', the drain filter is likely clogged. Check and clean the drain filter to resolve this issue.
Why is my LG WM22WV26SR Washer making a rattling and clanking noise?
If you experience rattling and clanking noises from your LG Washer, it's likely due to foreign objects in the drum, such as keys, coins, or safety pins. Stop the appliance and check the drum for these items.
Why are my clothes wrinkling in my LG WM22WV26SR?
Wrinkling in your LG Washer can occur if the appliance is not unloaded promptly, so always remove items from the appliance as soon as the programme is complete. It can also happen if the appliance is overloaded, so the appliance can be fully loaded, but the drum should not be tightly packed with items.
Why is detergent not dispensed in my LG WM22WV26SR Washer?
If detergent is not dispensed incompletely or at all in your LG Washer, it could be because too much detergent is used, so follow the guidelines provided by the detergent manufacturer. Also, the Drain Pump Filter may be blocked, so clean the Drain filter.
To Next Page
General
