LG WM2277H Series - Water Entry Issues; Drainage Problems; Washer Not Starting; Spin Cycle Problems

TROUBLESHOOTING GUIDE
Problem
PossiUe Cause
Solution
Water does not enter
washer or it enters slowly
• Water supply is not adequate
in area.
Check another tap in the house.
• Water supply tap is not
completely open.
Fully open tap.
• Water inlet hose is bent. Straighten hose.
• The filter of the inlet hose
clogged.
Check the filter of the inlet hose.
Water in the washer does
not drain or drains slowly
• Drain hose is bent or clogged.
• The drain filter is clogged.
Clean and straighten the drain hose.
Clean the drain filter.
Washer does not start • Electrical power cord may not
be plugged in or connection
may be loose.
Make sure plug fits tightly in wall
outlet.
• House fuse is blown, circuit
breaker tripped, or a power
outage has occurred.
Reset circuit breaker or replace fuse.
Do not increase fuse capacity.
If problem is a circuit overload, have
it corrected by a qualified electrician.
• Water supply tap is not turned
on.
Turn on water supply tap.
Washer won’t spin • Check that the door is firmly
shut.
Close the door and press the
Start/Pause button. After pressing the
Start/Pause button, it may take a few
moments before the clothes washer
begins to spin The door must lock before
spin can be achieved.
Wash cycle time delayed • The washing time may vary by
the amount of laundry, water
pressure, water temperature,
and other using conditions.
If the imbalance is detected or if the
suds removing program operates, the
wash time shall be increased.
21
ENGLISH